How to Disabling Low Ink Level Notification for Canon IP and MP

1. Push “resume” for 5 seconds for canon IPXXXX. For canon MPXXX you must enter to service mode.
2. Push Power switch then remove power cord.
3. Insert plug power cord while pressing “power switch” at the same time.
4. Push Start/reset by step 2 continue Wait display shown “0″
5. Push + change display from “0″ to “1″
6. Push color button 2 times
7. Push Power switch again , Printer will print 1 page
8. Open cover
9. Unplug power cord
10. Take out ink cartridge #40 and #41
11. Insert plug again
12. Push power switch
13. Open cover (scan cover)
14. Insert ink cartridge #40 and #41 again

Enter to service mode for canon MPXXX

* With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
* When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
* When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)

Read more »

Posted in: Canon

how to Full Reset Waste Ink Tank for Canon i80

Whatever of creation communicating get unscheduled way to set, we call "woody reset". Ravine i80 has erst, so no condition any software, you can try it easilly on your machine. Do as your sea

* Ambient the print precede underwrite, and transmit off the machine.
* Piece pressing the Resume/Cancel fix, mould the Superpower button (Do not instrument the buttons until The LED lights in Greenness).
* Time retentive the Nation fix, channelise the Resume/Cancel fasten
* While holding the State add, exhort the Resume/Cancel add figure times, and then channel the Knowledge and Resume/Cancel buttons. During initialisation, the LED blinks in ketamine.
* When the LED stops shut and lights in immature, push the Resume/Cancel fasten the 4 times.
* Mold the Cognition secure. The LED lights in viridity, and the elite use is performed. When the knowledge completes, the printer returns to the agenda option fashion automatically.
* Force off the machine and then aft on and attempt.

Read more »

Posted in: Canon

Reset Canon Pixma iP1800

Download Inexact Epson Personnel 500 Manual.pdf This Epson Men 500 individual drill, Epson Personnel 500 Person Draw, Epson Hands 500 Owners Manual, Epson Personnel 500 activity recitation contains the information you requisite when start, equipment, setting, configuring, upkeep and troubleshooting, operating manual the Epson Personnel 500.
download

Read more »

Posted in: Canon

Bagaimana cara Membuat Pembuangan Canon IP 2770

Kalau kemarin sudah pernah posting tentang cara infus IP 2770, kali ini kang EKo akan posting tentang Cara Membuat Pembuangan Canon IP 2770. Cara ini juga kang Eko dapatkan dari browsing dan kebetulan ada panduan gambar yg bagus. OK, mau tahu caranya .Cara Membuat Pembuangan Canon IP 2770Seperti biasa, panduan Cara Membuat Pembuangan Canon IP 2770 ini berbentuk gambar sehingga mudah untuk diikuti

Read more »

Posted in: Canon

How to reset canon i250

To reset the meter where the ink tank is full in the printer Canon i250, i255, i350, i355 is two steps, reset it manually or through a program. Ambos métodos son excelentes, pero esta ocasión veremos los dos métodos manuales para resetear. Both methods are excellent, but this time we will see the two manual methods to reset.

Primer método de reseteo manual debes hacer los siguientes pasos: First method manual reset should do the following steps:

*
Desconecta el cable de poder y el cable USB. Unplug the power cord and USB cable.
*
Abrir la cubierta del impresor y presiona el botón de poder. Open the printer cover and press the power button.
*
Sin soltar el botón de poder, conecta el cable de poder al impresor. Without releasing the power button, connect the power cable to theprinter.
*
Cierra la cubierta del impresor y suelta el botón de poder. Close the printer cover and release the power button.
*
Y listo a imprimir And ready to print

Segundo método de reseteo manual Second manual reset method

* Apagar el impresor. Turn off the printer. Y desconectar el cable de poder. And disconnect the power cord.
* Presiona el botón de poder y no lo sueltes en los siguientes pasos, el impresor queda encendido. Press the power button and do not let go of the following steps, the printer is on.
* El indicador LED debe ser color verde. The LED should be green.
* Presiona y libera el botón REINICIO (“Segundo botón”) , el indicador LED debe mostrarse color naranja. Press and release the RESET button (second button), the LED should show orange.
* Presiona sin libera el botón REINICIO (“Segundo botón”) nuevamente, el indicador LED debe ser color verde. Press and release the RESET button (second button) again, LED should be green.
* Libera ambos botones. Release both.
* Y listo a imprimir And ready to print

Ahora que ya tienes mas conocimiento debes ponerlo en practica, espero te ayude este articulo sobre como resetear contador de impresor Canon. Now that you have more knowledge you put it into practice, I hope this article helps you on how to reset Canon printer counter.

Recuerda cheveamigo(a) Compartiendo este articulo y comentando ayudas a recargar tinta .com hazlo no te tomara mucho tiempo. Remember cheveamigo (a) sharing and commenting on this article help recharge ink. Com do not you take a long time.

Read more »

Posted in: Canon

Error 27 on Canon MP 160

The Canon MP 160 multifunction printer error 27 appeared on the screen and not printed, or made photocopies.

Solución: Solution:

Lo recomendable sería limpiar las esponjas que lleva para acumular el exceso de tinta. It would be advisable to clean the sponges that leads to accumulation of excess ink. Se pueden sacar ylimpiar con un poco de agua y secarlas bien. They can be removed and cleaned with a little water and dry them thoroughly.
Luego debemos resetear el contador de tinta, para que nos vuelva a permitir imprimir y fotocopiar. Then we reset the ink counter, so that we again allow printing and copying. Para esto último hacemos lo siguiente: For the latter, do the following:
1.- Enchufamos la máquina. 1 .- Plug in the machine. Con ella apagada presionamos el botón STOP/RESET y lo aguantamos pulsado. With it off by pressing the STOP / RESET and endured down.

2.- Sin soltar STOP/RESET pulsamos 1 vez el botón ON/OFF para encender la máquina y seguidamente volvemos a pulsar ON/OFF y mantenemos pulsado y rápidamente soltamos STOP/RESET y pulsamos 2 veces STOP/RESET y soltamos también ON/OFF. 2 .- While holding STOP / RESET button once you press an ON / OFF to turn the machine back and then press ON / OFF and hold and quickly release them STOP / RESET and press 2 times STOP / RESET and release also ON / OFF .
3.- Esperamos a que quede encendido el led de que se produjo algún fallo. 3 .- We hope to LED lights is that there was a failure. Tiene el dibujo de un triángulo y es el primero, que está encima de los 2 led que indican si falta tinta negra y tinta de color. Is a drawing of a triangle and is the first, which is above the 2 LED indicating whether missing black ink and colored ink.
4.- Una vez vemos que está fijo y la máquina a parado de funcionar, ya no hace ruido, eso quiere decir que estamos en modo mantenimiento. 4 .- Once we see that is fixed and the machine stopped working, and makes no noise, that means we're in maintenance mode. Pulsamos entonces STOP/RESET 4 veces, veremos como según las vamos pulsando el led de fallo se apaga y se enciende según nuestras pulsaciones. Then press STOP / RESET 4 times, we see as pressing as the fault LED is turned off and on according to our presses.
5-. 5 -. Una vez pulsado STOPP/RESET las 4 veces. After pressing STOP / RESET 4 times. Pulsamos el botón ON/OFF 2 veces para apagar la máquina. Press the ON / OFF two times to turn off the machine. Quizá tengamos que aguantar unos segundos para apagarla. We may have to endure a few seconds to turn off. Es importante que se apague de esta manera para que queden los cambios bien guardados. It is important to turn this way so that changes are well kept.
6.- Una vez apagada la Canon MP 160, pulsamos el botón ON/OFF para volver a encenderla y comprobaremos, si hemos seguido bien los pasos, que el problema está resuelto. 6 .- Once off theCanon MP 160, press the ON / OFF to turn it back on and check if we have followed the steps but that the problem is solved.

Read more »

Posted in: Canon

How To Reset Waste Ink Printer Canon 'S' Series

Search To Find Service Manual, User Manual, Owners Manual and Resetter Printer
Saturday, September 08, 2007
How To Reset Waste Ink Printer Canon 'S' Series

Here this step to reset waste ink printer canon "S" series

1. Turn off the printer.
2. Press and hold the RESUME button, then press and hold the POWER button.
3. Release the RESUME button, Next press and release the RESUME button two(2) more times in succession. Note: you are still holding the POWER button). Theprinter’s carriage will “reset” or move momentarily. If the above was properly performed the printer will enter the “Service Mode”.
4. Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp will alternate (change) color with each key press.

After selecting the desired mode (eg 4), press the POWER button to “set” the change, and return to the top of the function selection menu. Press the POWER button again to restart theprinter.

Read more »

Posted in: Canon

Download Free BJC-4300 User Manual

The BJC-4300 Series printers offer excellent print quality and fast print speed using both color and black inks. We are certain you will be satisfied with this advanced Bubble Jet technology.

Your BJC-4300 Series printer supports excellent and unique print media options that will allow you to produce dazzling, professional, and fun presentations. All of these print media are specially designed and manufactured to work with your Canon color printer so you can produce the finest output possible.

Table of contents Canon BJC4300 User Manual

* Introduction
Supplies and Accessories ~ BJ Cartridges and BJ Tanks ~ Canon Specialty Papers ~ Color Image Scanner Cartridge ~ Getting Help From Canon ~ Servicing the Printer
* Using the Printer With Windows
Installing a Printer Driver ~ Printing a Document ~ Printer Setup Within Windows 95 ~ Printer Setup Within Windows 3.1 ~ The Windows Tabs ~ Printing Speed Versus Color
* Paper Handling
Selecting Paper Types ~ Setting the Paper Thickness Lever ~ Printer Settings for Various Print Media ~ Loading Paper ~ Printing on Envelopes ~ Using Canon's Specialty Papers
* Maintaining the Printer
Printer Guidelines ~ Cleaning the Printer ~ Printing the Test Pages ~ Cleaning the Print Head ~ BJ Cartridge Guidelines ~ Replacing the BJ Cartridge
* Troubleshooting
you may download here

Read more »

Posted in: Canon

How to reset waste ink / blinking printer canon ip4200

With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)

While holding the Power button, release theresume/Cancel button. (DO NOT release the Power
button.)

While holding the Power button, press the Resume/Cancel button 2 times, and then release both
the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)

When the Power LED lights in green, press the Resume/Cancel button the specified number of
time(s) setting).

Time(s) LED indication Function Remarks 0 times Green (Power) Power off When the print head is not installed, the carriage returns and locks in the home position capped.
1 time Orange (Alarm) Service test print .
2 times Green (Power) EEPROM information print
3 times Orange (Alarm) EEPROM initialization
4 times Green (Power) Waste ink counter resetting
5 times Orange (Alarm) Destination settings After entering the destination settings mode, press the Resume/Cancel button the specified number of time(s) to select the destination. For detail, see "Destination settings procedures" below.
6 times Green (Power) Print head deep cleaning (Cleaning of both black and color)
7 times Orange (Alarm) Reserved
8 times Green (Power) CD / DVD check pattern
9 times Orange (Alarm) CD / DVD print position
correction (horizontal: X direction)
10 times Green (Power) CD / DVD print position
correction (vertical: Y direction)
11 to 13 times Orange, Green, Orange(Alarm,
Power,Alarm) Return to the menu selection
14 times Green (Power) Left margin correction Not used in servicing.
15 times Orange (Alarm) Return to the menu selection


Time(s) LED indication Destination CD / DVD print
0 times Green (Power) No change of the destination
1 time Orange (Alarm) Japan Supported
2 times Green (Power) Korea Not supported
3 times Orange (Alarm) US Not supported
4 times Green (Power) Europe Supported
5 times Orange (Alarm) Australia Supported

Read more »

Posted in: Canon